If You Want to Understand How to Maintain Your Vehicle Before Taking

 

At first, car maintenance may seem overwhelming, but start small and move your way up the car repair ladder. Here are some easy car maintenance and repair projects before you go for MOT Bolton.

Switch Out the Wiper Blades

Knowing when to replace your blades is simple. Test your blades by pressing the washer button and seeing if they wipe clean. They are toast if they streak. There are plenty of budget blades available at the auto parts store, but choose a brand instead. They are more expensive than budget blades, but the better rubber lasts a long time and provides better UV protection.

Observe the installation guidelines provided on the package. When you remove the old blade, make sure you have a firm hold on the wiper arm.

If it escapes your control, it might hit the windshield so hard that it cracks.

Move the PCV Valve.

Though it seems complicated, this is not. Every other oil change, if your car has a PCV valve, you should remove it. Don't be too hard on yourself if you can't find it; PCV valves aren't always present in late-model vehicles. Unscrew the valve after removing the vacuum hose from it. Shake it to run the world's simplest diagnostic test. It's good if it makes a metallic tapping sound. Although used PCV valves all appear soiled, don't replace it based solely on appearance.

Engine Air Filter Replacement

Examine and change the engine air filter. To remove the old filter, simply disassemble or unscrew the air filter box retainers. Carrying a shop light behind the filter will allow you to check how much light is passing through it. Replace the filter if it blocks more light by at least 50%. If not, reinstall it, fasten the cover over the air filter box, and carry on driving. 

Gas Lifts 

When you can remove gas lift cylinders on your own, why take a chance with your head? Simply purchase new lifts anywhere at auto parts retailer. Then, while you detach and start replacing the worn lifts, have a helper grab the hood or liftgate. Using only a metric socket set, many designs can be removed easily. Simply insert a tiny flat-blade screwdriver between the spring clip and the cylinder to disengage it. After that, detach the cylinder from the ball stud.

Replacing the Bulbs

Simply unscrew the preserving screws and unscrew the lens to gain access to the burned-out plate number, side marker, and fog light bulbs. Directly out of the socket, remove the bulb. Use gloves when handling the new bulb or hold it with a towel to prevent skin oils from adhering to the thin glass, which could lead to early bulb failure. Once it clicks, push the bulb firmly into the socket. After that, simply reinstall the lens.

Change That Damaged Antenna

Simply unscrew the remaining mast section, then purchase a replacement mast from any auto parts retailer. Even though replacing a pillar mount antenna requires more work, it can still be done at home.

Your radio's antenna cable should be disconnected. Attach a long piece of string to the extreme. Before bringing the cable back inside your car and connecting it to your radio, connect the new antenna cable to the string. Then, using the supplied screws, fasten the new antenna to the pillar.

How to Repair Chipped Automotive Paint

If you don't paint over paint chips with touch-up paint, they'll cause corrosion and you'll be dealing with a much bigger issue. It's simple to fix chipped car paint. Just purchase wax and grease remover, fine tip paint brushes, and touch-up paint from any auto parts retailer.

After using the wax and grease remover to clean the chip, let it dry. Adding too much will cause the paint to drip. Wrap up your car paint touch-up after 30 days by letting it completely dry and applying wax.

Repair That Leaky Roof

Your sunroof drainage are probably clogged if raindrops keep landing on your head. Check the front and back edges of your sunroof for drain holes by opening it up. Once you've found the drains, attach a small rubber or plastic tube with duct tape to the end of your shop vacuum and use it to suction out any debris that may be lodged there.

If water is emptying onto your parking space or garage floor, check under the car after dribbling water into each drain. As you gently push the cable down the drain while spinning it with your fingers, insert it into the drain. Avoid pushing too hard because doing so could damage the drain tubes and cause water to spill into your dash area. You're finished and it shouldn't have any additional water entering your car if it now runs freely. You can opt for Car Service Bolton.